The Easiest and Fastest Way to Stain a Fence | Austin Painting Experts

The Easiest and Fastest Way to Stain a Fence | Austin Painting Experts

Bookmark this article for an easy Austin painting guide on how to stain your fences the easiest and fastest way!

Painting a fence using an airless sprayer is ultimately the best thing to do. It gives you the ability to color every area in an even manner. However, ensure you back brush or remove all dirt on fences before staining. For rails, use a smaller spraying tip. It is much better to use an orifice larger in size at it has minimum clogs. Temperature is a determining factor due to the viscosity of paint.

Step 1: Choose Your Paint
First, select the stain or paint you would like to use for this project. It is critical for you to pick the right color stains.

Step 2: Prepare the Fence for Paint
Carefully power wash the wood ensuring that do not damage it, while at the same time leaving it spotless. Many times cleaners bought over the counter end up being a nuisance. Such filters do not necessarily reduce the time spent on washing and cleaning because you constantly have to take breaks now and then. Many individuals a dissolve TSP solution (Trisodium Phosphate) in warm water, mixed with a given amount of detergent.

Step 3: Measure the Amount of Stain to be Used
Since the amount you apply is imperative, use a sufficient amount that will not remain or drip from the wood. The stain is mainly supposed to get absorbed into the wood, and nor drop off or stay on the rail. Especially when dealing with a stain that is lowly viscous. For a shiny reflective layer, consider using clear coat instead of transparent stain. Semi-transparent stains have the possibility of cracking when it fails. However, add the amount of stain to dry it off but not too much as it would drip.

Step 4: Spraying the Boards
Try to spray the whole area without stopping. While at it, angle your spray to many different angles to enable you to access every edge boards. Ensure you brush carefully each board fence from one end to the other for the best and appealing results. For you to avoid worrying about accidentally staining your house, it is appropriate that you mask the house at least five feet with plastic.

Step 5: Back Brushing Stain
Dye needs proper attention and works deep into every crack. For any reason that you are not able to reach these areas before it dries up, consider adding more stain until you achieve this. Drive your concentration towards areas with easy access before the stain dries off. Some areas face direct sunlight while other face away from light. These are the factors to consider even before the whole back brushing process begins.

Best Weather and Time to Apply Stain
The application of stain needs precise and keen timing of weather conditions. Avoid working during the rainy seasons at all cost. In addition to this, hot weather is not appropriate for the application of stain as it brings about the heating of stain. Reconsider working in extremely humid conditions with humidity levels above 85 degrees. The best time to begin working on staining your fence is early morning hours when the humidity ranges between sixty and seventy degrees.

Can’t handle this amount of work? Hire a professional painter in Austin TX instead! Get a FREE quote on your project’s Austin home painting cost by calling us today!