Interior Painting in Austin TX | Walls or Trim First?

Interior Painting in Austin TX | Walls or Trim First?

Interior painting in Austin TX can be a tough challenge if you don’t know the tricks of the trade. Learn more about how to paint walls and trims in today’s blogpost!

When it is time to paint, many amateurs face the same question – should I paint the trim or the walls first? Painting professionals say that it is better to start with larger areas such as ceilings and walls and then move onto painting the trim. Some people feel secure to paint the walls first. Others start with painting the doors or window trim first. Both of the techniques have their advantages, but before you start painting, you need to know pros and cons of these strategies.

Painting the trim first
The best part about painting the trim first is that you can prevent the paint to touch the walls. It is also possible to get better results in the paint job when you start with the trim. The advantage of painting trim before the walls is that you can cover the rest of the surface that not need paint. It relieves you from the thought of annoying spatters. The only flaw is that masking the woodwork takes lot of time, and you need to wait for a day before you can proceed to paint the walls.

Here are some tips and techniques to paint the trim first:
1. On the edges of the wall put a masking tape, especially on the area where trim and edges meet. After the area which is to get painted is prepared, use a stick to formulating the paint and stir it well. Before you start painting, mix the paint so you can avoid any bubbles or bumps on the painted surface.

2. Use a 2-inch sash brush to paint the trim. Dip the brush in the can of paint, such that only one-third of the bristles gets coated with paint. If the brush has caught more paint than you need, then tap both the sides of the brush against the edge of a can. You will not be able to control the excessive paint and get spatters on the floor.

3. You should keep your color guard ready when you are about to start to paint the trim. Use the guard on ceilings' bottom edge and adjacent walls of your doorway and windows. Keep the guard ready by holding with your non-painting hand.

4. Apply a good amount of paint tenderly on the widest parts of the trim. While using paint, use a single stroke and in a single direction, so you don't leave brush marks. Press the brush gently so the bristles have a flex, to apply the paint in the best manner.

5. You may use following strokes on the dry areas before heading towards wet areas. In this way, you can remove the lap marks that ruin the smoothness of the paint.

6. Apply a good amount of paint on trim edges. Use a thinner while painting on tight sections. For a good look, add another coat of paint after the first one is dry.

Painting the wall first
Coloring the walls first is also a good choice. Walls are a drag to paint. If you get the hard work done before, then you can paint the trim with ease. Wall painting takes up a lot of time, so going for it in the first place will save up a lot of your day.

Here are some tips to paint the walls first:
1. Cover all your furniture and floors to avoid any drip marks of the paint. Before you start painting, remove the dirt and debris of the wall with the mixture of water and detergent powder. Cover any dents or halls in the wall. You may use sandpaper to keep the surface smooth.

2. Cover the adjacent areas of the wall with a tape to keep them clean from any spatters of paint. Once you are ready, start with the top portion of the wall and then move onto other areas. Remember to wait for at least a day before adding another coat to the wall.

Painting trim first or the wall is solely your choice. You should consider the pros and cons of both, and choose the option according to your flavor. However, for a better option, why not hire the best painters in Austin TX instead? Trust only the Painting Pro Guys Austin for all your Austin home painting needs!