Interior Painting in Austin TX | Creating Accent Walls

Interior Painting in Austin TX | Creating Accent Walls

For your interior painting in Austin TX project, why not learn how to make use and create accent walls? Read on to learn more about this simple yet effective painting trick!

The primary objective for painting a room is to acquire the best attractive image. To achieve this interesting outlook for a room, accenting a wall can be helpful. Simply do this by applying different colors on walls. Therefore, you can accent a wall in your room by painting it with the various colors unlike the others, to make it more beautiful.

To achieve this, you need to adhere to the steps on how to paint accent walls as highlighted in this article.

Choose Your Favorite Color and Paint Finish
After having thought about accenting a wall, first, before even planning, choose your color. Here most people encounter difficulties. You can consult your partner or study colors to learn tips on how to get your desired look. Also, you should also keep in mind the amount of paint you purchase. Try as much as possible to acquire paint that is enough for your project. You can utilize a paint calculator to help you estimate the amount of paint required.
Now that you have just purchased the right, color for your project does not leave the store just yet.

Think about your finishing. Finishing on walls is equally very crucial, bringing out the desired outcome of your project. You can use eggshell or matte finish for the home office, but apply semi-gloss paint or stain for any other room.

Prepare for Your Project
Empty the room if it is full. Remove all any material that will probably interfere with your work, including electrical sockets. You can cover them with painter’s tape. After clearing the room, protect the floor by covering it completely with rags. Rags are mostly preferred as they can absorb paint if it spills.

You can then tape the woodworks and frames that are not going to paint, thus helping when cutting in and making it a bit easier. Always use painters tape and not any other. Once you have done with taping, remove air spaces in between the tape and the surface by pressing over with a putty knife, to prevent paint from penetrating under the tape. Always remember to remove the tape before the paint dry. When the paint dries on the tape, it will come out with some paint.

Remove Old Paint and Dust the Room
Before starting this work take caution and wear goggles. Scrape the wall using a scraper to remove old paint. Then, eliminate small particles that with stuck in holes and cracks using a dry paintbrush. After finishing, wash the walls and ceiling with a soap detergent using a sponge mob. TSP solution is recommended for cleaning, the rinse with water and let it dry well.

Clean the trim also using a wet piece of cloth. Remove all dust along the edges of the baseboard and frames of windows and doors. Make sure there are no sand particles that can stick to the brush as you paint.

Cover Cracks and Holes
Cover the grooves and holes using a sparkling compound. Apply the mixture to the cracks and holes using a putty knife and level it properly. Wait for it to dry well and sand it to smoothen.

Prime the Walls
Prime is needed to cover bare wood and drywall surfaces, as it always brings out the best results after painting. It also saves on paint, as you only need to use lesser topcoats. You should consult your contractor to guide you purchase the best prime for your work.

Paint the Room
Always start by painting the trim first. Maintain one direction. Make sure you have covered all areas. Then paint door and window trim and any other molding. Before the paint, dries remove the tapes.

Once you have done painting the trim, you can now start cutting in. Doing this will assist you to get straight lines at the angles. By the help of a small brush, paint along the corners where walls or wall and ceiling meets. Make sure you maintain a wet edge as you paint. You can use painting pads to make cutting in around frames easy.

After done with cutting in you can progress to painting the ceiling first. A roller is preferred for this work. Using a roller with an extension pole, apply the paint maintaining one direction. Do not apply pressure when using the paint. Use the W paint technique to paint your walls. Using a roller with extension draw the letter W and then fill it quickly without lifting the roller. Move vertically along from one side to the side.

What’s the best way to paint?
Your best option is to have your home painted by the experts in home painting in Austin TX, the Painting Pro Guys! You won’t have to worry about your Austin house painting cost as we know how to reduce costs in every project. All you have to do is contact us or visit our website and we can give you a FREE quote!