Austin Painting Expert Tips: How to Cover a Dark-Colored Wall with a Lighter Paint Color

Austin Painting Expert Tips: How to Cover a Dark-Colored Wall with a Lighter Paint Color

Planning on making your walls lighter with a new paint job? Here’s some tips from the Austin Painting Expert to help you ensure that your paint job is a success!

Covering a dark-colored wall with light color paint is a challenging task. When you spend your time and resources painting a dark-colored wall, you do not want to get upset by seeing the shadows appearing through your fresh paint. With the help of the right painting tools, a primer, and the right kind of paint, you can avoid unpleasant surprises when the paint job is complete.

Clean Walls and the Painting Tools
You should use a mixture of warm water and mild dish detergent to remove dirt and grease accumulated on the wall. Paint sticks fast to clean walls, which makes the surface opaque. The choice of the best painting tools allows you to apply paint and the primer in a quick and efficient manner. High-quality roller covers and paint brushes help you to hide your dark colored walls by releasing color in a smoother and heavier film. A high-quality paintbrush should have split ends to produce an even finish, should be comfortable to hold, and should have a flexible tip. The bristles should be twice the length of the width of your paintbrush and should not fall off briskly. Squeezing the roller cover determines the quality. If it comes back to original shape after squeezing, then it is of good quality; otherwise, it is of poor quality.

Primer
Applying at least two coats of high-quality primer and sealer can seal the dark-colored walls having tiny interstices through which air may pass. Light-color may produce an uneven tone if the black walls are not sealed; this causes the dark color to show through the paint. Add a proportionate of gray color to your primer or another color which is similar to your primer. The tint reduces the amount of topcoats of paint you will need to apply. The tinted primer also makes your paint opaque covering the blemishes and dark color of the wall surface. Let the primer dry between the coats.

Paint
Using a diluted or low-quality paint reduces the hiding capacity of dark-colored colors. High-quality paints contain a greater amount of pigments and preferred binders than the low-grade paints. These ingredients adhere to the wall after color dries which provides better coverage. Titanium dioxide is a common ingredient of high-grade paints, a pigment which increases the hiding power of color to eliminate any dark colors showing through light colors. Remember to mix the paint thoroughly before applying it.

Dry Time
Allow every coat of primer and topcoat to dry for about 10 to 12 hours before applying the next layer. The insufficient time between primer and color application decreases the hiding power of paint. If the paint is not completely dry before applying another coat of paint, then the paint can fail to hide bold-colored wall underneath it. Time given to dry may vary according to the type of weather but at least two hours between interior latex coats. The humidity level also impacts the time that paint takes to dry.

Hopefully, these tips can teach you how to cover dark-colored walls with a lighter paint color successfully. For more interior painting Austin tips, check out our other blog articles!