A DIY Guide to Home Ceiling Painting in Austin
What’s there to know about ceiling painting in Austin? In this article, we’ll be sharing our guide on how to paint the ceiling by yourself!
Pour a gallon of paint, into a five-gallon bucket with a roller grid in it, empty about three-quarters of the paint. Desist from doing this in a big enough bucket as the five-gallon one to avoid constant breaks for a refill. The ceiling needs no time to dry before you finish. As such, ensure you maintain a wet edge when rolling the roof. For this reason, roll out with a roller grid in a five-gallon bucket.
With the remaining quarter in your paint can, use a paintbrush and apply the paint on all corners and edges of the ceiling. For you to get close with the roller, you need to cut your swath at an average of four to five inches away from the roof. However, if you are thinking of applying different colors on the wall, only extend the ceiling color to an inch down the wall. Ensure you paint every inch of the roof. However, if you are to paint the same color on your walls as it is on the ceiling, then you have to paint the same number of strokes on both sides. About four-inch intervals. After finishing a given section, refine your brush into your wet edge after your last brush. Do this before heading on to the next part of the ceiling to help prevent start marks and blend to the previous stroke.
After sharply increasing length, brush around anything that may be left out. Cover roughly four inches as always and ensure there are no marks left behind indicating where you began painting and where you stopped.
Time to Roll
You need some tools or equipment in carrying out this stage. Proper and quality tools guarantee you a steady rolling process from your first stroke to the last. Some of the tools you require are a roller cover that has an appropriate roller handle, a roller pole that is both state and extendable for convenience and a roller cover. The type of roller cover, however, depends on the kind of ceiling in play. For instance, best deal with textured ceilings using half-inch paint roller, while a one and a quarter inch roller cover are best for use on popcorn ceilings.
Find Your Sweet Rolling Spot
The first step requires you to come up with a consistent uniform layer throughout the ceiling. Some professionals prefer moving towards the source of light, while other prefer rolling across their standing position. In whichever direction you choose, be sure to use it all through for best results as well as preventing any signs of visible roller lines. You can achieve a shadowing effect if painting towards the current source of light.
Furthermore, advance to the furthest left corner of the room after selecting a preferred direction. Rolling paint is not an easy process, but it basically consists of two main steps.
1. Rolling paint by laying it on and off in sections without possibly giving it time to dry off. Also referred to keeping a wet edge always, meaning that you do not cover dried paint. If you are doing this, then it is similar to applying fresh paint on old coat ending up with undesired marks.
2. Rolling the entire ceiling width with one single stroke. You can only achieve this if you have a long pole, which is both flexible and durable for the task. However, this is understandably not always possible without having to move along with the pole. By walking around with the pole, you would be shifting the amount of pressure on the roller, thus uneven results. You can achieve this by dividing the ceiling into equal sections, with the final strokes intersecting at the center of the roof. You can devise this according to the width and length of your roof for you to acquire a stationary position. Allow to dry off in one or two hours.
However, if you’re looking to paint a huge part of your home, including your walls, call the true painting experts in Austin, Painting Pro Guys Austin! We’ll be sure to have the right service package for you. Call us at 512-865-6580 for inquiries.